OSCIJET

The perfect nozzle for every application

OsciJet – The All-Rounder

The OsciJet nozzle is the multitalented solution for your application. It is based on a smart flow channeling which induces an instability in the internal flow. Thereby, this innovative nozzle is able to emit a sweeping or pulsating stream of fluid – without any moving parts.
For the first time, the OsciJet nozzle enables to take advantage of dynamic jets even under the most difficult conditions and without concessions in durability, reliability, and maintenance of the overall system.
The OsciJet nozzle provides the required oscillation frequency for your application with frequencies ranging from a few oscillations per second up to ultrasonic values (approx. 50kHz). A low frequency version is ideal for cleaning applications and yields an up to 7 times better cleaning result. High frequency designs are more suitable for mixing enhancement (e.g., fuel with air) and spray generation. Compared to a conventional nozzle, the OsciJet nozzle yields up to 15 times better mixing.

Applications

Mixing
enhancement/
Injection

Surface
cleaning

Spray
generation

Mischungs-
verbesserung/
Eindüsung

Oberflächen-
reinigung

Spray-
erzeugung

Cooling

Fluid distribution

read more

Kühlung

Fluidverteilung

mehr Details

Specifications

  • OsciJet LPX-CS
  • OsciJet LPX-CS 360
  • OsciJet HPX-CS
  • OsciJet HPX-CS Pro
  • OsciJet HPX-MS

Cleaning nozzle

The LPX-CS is the special nozzle for surface cleaning with lower pressures. This nozzle can be operated from 130 mbar up to 16 bars and is desigend to reach its peak-performance in this pressure range. This was accomplished by tuning the jet dynamics and frequency for exactly this pressure range, resulting in an up to 7 times more effective cleaning compared to a conventional fan nozzle. As for all OsciJet nozzles, the spray angle is almost constant for all flow rates and pressures and can be adapted up to 90° per customer request.

Spray angle

5-120°

Fluid

Water/cleaning agent

Material

Stainless steel

Container cleaning nozzle

Several OsciJet nozzles are arranged circumferentially in the housing of the LPX-CS 360 in order to create a 360° spray. This nozzle is designed for the cleaning of tanks and reservoirs without the need of mechanical components as those components are prone to blockage and failure. Due to the compactness of the nozzle, it can be permanently integrated inside the reservoir. This nozzle is desigend to work with water pressures of 1 – 10 bars, but can also be adjusted for higher working pressures or pressurized air.

Spray angle

360°

Fluid

Water/cleaning agent

Material

Stainless steel

High pressure nozzle

Especially designed for cleaning employing high pressures (e.g., pressure washers), the HPX-CS is the innovation in the cleaning segment. It features an optimal working pressure of 60 – 120 bars, but also works at pressures as low as 5 bars. The spray angle can be adapted for both nozzles as requested by the customer. Nozzle sizes between 20 and 200 are currently available.

Spray angle

5-60°

Fluid

Water/cleaning agent

Material

Stainless steel

Professional high pressure nozzle

The OsciJet nozzle is the multitalented solution for your application. It is based on a smart flow channeling which induces an instability in the internal flow. Thereby, this innovative nozzle is able to emit a sweeping or pulsating stream of fluid – without any moving parts!
For the first time, the OsciJet nozzle enables to take advantage of dynamic jets even under the most difficult conditions and without concessions in durability, reliability and maintenance of the overall system.
OsciJet nozzles create a self-induced oscillation without requiring any moving parts. The mechanism is as simple as it is reliable. If the inlet is pressurized with a liquid or gas, the jet adheres to either one of the side walls in the central main chamber. From there the jet impinges onto the wall close to the exit where it splits into two parts. While the main part of the jet exits the device, a small portion of the fluid is diverted through the feedback channel back to the inlet where it pushes the main jet to the opposite side. The process is repeated on the other side, producing a freely oscillating jet at the outlet. This dynamic jet generates a higher input pressure on the contaminated surface, which improves your cleaning result up to factor 7.

Specifications

The OsciJet HPX-CS Pro is the innovation on the high pressure cleaning market. Using a smart flow channeling, the HPX-CS Pro produces a compact, sweeping jet without the need of moving or rather rotating parts. This way, for the first time, the HPX-CS Pro couples an improved cleaning performance with the reliability of a flat fan nozzle.
The HPX-CS Pro is manufactured in Europe and undergoes a strict quality control at FDX to confirm the superior durability. The HPC-CS Pro is available in all common nozzle sizes. On demand, we also offer higher pressure ranges, custom connections and labels (white-labeling), as well as calibrated nozzles (discharge tolerance +- 2%).
The default model of the HPX-CS features the following technical specifications:

Medium

Water/Cleaning agent

Material Stainless steel
Connection G1/4″ female thread
Spray angle 25°
Düsengröße* in steps of 5 (25-200)
Max.inlet pressure 200 bar

*) The nozzle size is defined as the flow rate of water in l/min at a pressure of 20 bar, multiplied by 10

Flyer

Flyer

PDF

Customer feedback

After over 12 months in continuous use, we are convinced: the OsciJet HPX-CS Pro by FDX delivers best cleaning results and outstanding durability.
(Frank Koslitzki, CEO Stadiko)

Fuel nozzle

Design with respect to the pressure directive, the HPX-MS is created for fuel injection (Diesel, fuel oil) in combustion processes. Even with varying inlet pressures (0.4 – 200 bar) this nozzle features a constant spray angle and fine droplets. Desinged for long-lasting performance it offers extreme robustness even in highly aggressive environments. Reliability and maintenance free operation are the key concepts for this nozzle type.

Spray angle

5-40°

Fluid

Heating oil/Diesel

Material

Stainless steel