{"id":7526,"date":"2021-01-11T18:06:54","date_gmt":"2021-01-11T17:06:54","guid":{"rendered":"https:\/\/www.fdx.de\/en\/?page_id=7526"},"modified":"2024-02-02T15:34:07","modified_gmt":"2024-02-02T14:34:07","slug":"productfinder","status":"publish","type":"page","link":"https:\/\/www.fdx.de\/en\/productfinder\/","title":{"rendered":"ProductFinder"},"content":{"rendered":"

[vc_row][vc_column width=”1\/2″]

<\/div>[vc_column_text el_class=”blocksatz”]<\/p>\n

The importance of finding the right nozzle is often underestimated. If a nozzle is chosen too small, it works against the pump. This results in a higher power consumption and a higher mechanical load on the pump and supply line. If, on the other hand, a nozzle is selected that is too large, the power of the pump cannot be fully converted into pulse. This shows how important it is to select the components correctly. However, this can quickly become confusing. To help you choose the right nozzle, we have created this page. Here you can find the right nozzle in 4 ways. The easiest way is to use our nozzle wizard<\/a>. The wizard will guide you through the selection process in four simple steps. Or you can directly use the product table<\/a> if you are looking for a specific model. Otherwise, you can also use the nozzle calculator<\/a> to calculate a suitable nozzle and even put together a system of several nozzles. You are also welcome to simply contact<\/a> us and we will help you selecting the right nozzle or put together a whole nozzle system together. Last but not least, we have compiled the most frequently asked questions<\/a> for you.<\/p>\n

For clarification of technical terms, we provide an extensive glossary<\/a>. Probably the most important technical term is the nozzle capacity<\/a>. We use this to classify nozzles. Here, the nozzle capacity<\/a> describes a pressure-flow ratio and can be expressed by a single number. The nozzle capacity thus allows for calculating the flow rate for any given upstream pressure, which has proven to be very handy in real-world applications.<\/p>\n

[\/vc_column_text]

<\/div>[\/vc_column][vc_column width=”1\/2″]
<\/div>[vc_single_image image=”7213″ img_size=”large” el_class=”imgRounded”]
<\/div>[\/vc_column][\/vc_row][vc_row][vc_column width=”1\/2″]

Do you need support finding the right nozzle? Do you need a quote?<\/h3>
<\/div>

You are a distributor? We are looking for international partners!<\/h3>[\/vc_column][vc_column width=”1\/2″]
<\/div>Contact us<\/span><\/i><\/a>[\/vc_column][\/vc_row][vc_row css=”.vc_custom_1607348548785{background-color: #f7f7f7 !important;}”][vc_column]
<\/div>[vc_row_inner][vc_column_inner width=”1\/5″][vc_column_text el_class=”zentrieren”]<\/p>\n

Nozzle Wizard<\/strong><\/p>\n

[\/vc_column_text][vc_single_image image=”7385″ img_size=”150×150″ alignment=”center” onclick=”custom_link” link=”#anchor_nozzleguide”][vc_column_text el_class=”blocksatz”]<\/p>\n

The nozzle wizard guides you to the right nozzles in 4 simple steps.<\/p>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/5″][vc_column_text el_class=”zentrieren”]<\/p>\n

Product Table<\/strong><\/p>\n

[\/vc_column_text][vc_single_image image=”7381″ img_size=”150×150″ alignment=”center” onclick=”custom_link” link=”#product_table”][vc_column_text el_class=”blocksatz”]<\/p>\n

In the product table you will find all versions of our standard products.<\/p>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/5″][vc_column_text el_class=”zentrieren”]<\/p>\n

Nozzle Calculator<\/strong><\/p>\n

[\/vc_column_text][vc_single_image image=”7382″ img_size=”150×150″ alignment=”center” onclick=”custom_link” link=”#DG-chart”][vc_column_text el_class=”blocksatz”]<\/p>\n

The nozzle calculator graphically helps you to choose the right nozzle.<\/p>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/5″][vc_column_text el_class=”zentrieren”]<\/p>\n

Contact<\/strong><\/p>\n

[\/vc_column_text][vc_single_image image=”7394″ img_size=”150×150″ alignment=”center” onclick=”custom_link” link=”#anchor_contact”][vc_column_text el_class=”blocksatz”]<\/p>\n

We will be happy to help you select the right nozzle. We are looking forward to your inquiry.<\/p>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/5″][vc_column_text el_class=”zentrieren”]<\/p>\n

F.A.Q.<\/strong><\/p>\n

[\/vc_column_text][vc_single_image image=”7383″ img_size=”150×150″ alignment=”center” onclick=”custom_link” link=”#anchor_faq”][vc_column_text el_class=”blocksatz”]<\/p>\n

Browse our collection of frequently asked questions.<\/p>\n

[\/vc_column_text][\/vc_column_inner][\/vc_row_inner]

<\/div>[\/vc_column][\/vc_row][vc_row to_section_layout=”full-width” txt_section_color=”light” to_para_bg=”image” to_parallax=”parallax” to_para_img=”https:\/\/www.fdx.de\/wp-content\/uploads\/2016\/04\/BG_Blue.jpg”][vc_column][vc_row_inner][vc_column_inner]
<\/div>[text_type_vc align=”center” size=”48″ backspeed=”1000″ typersize=”48″ checked=”true” clr=”#ffffff” verticalclr=”#ffffff”]<\/p>\n

OsciJet.<\/strong> The right nozzle for your application.<\/p>\n

[\/text_type_vc]

<\/div>[\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][vc_row css=”.vc_custom_1607351300641{margin-right: 20px !important;margin-left: 20px !important;background-color: #ffffff !important;}”][vc_column]
<\/div>

\nIn 4 Steps.The Right Nozzle.<\/strong>\n<\/h1>
<\/div>[vc_column_text el_class=”blocksatz”]<\/p>\n

Our nozzle wizard guides you purposefully through the selection process. In the first step, the wizard asks you for the desired application. In the second step, the wizard asks you for a pressure range. Then, in the third step, the nozzle capacity is determined. Either you enter this directly, or you can determine it from pressure and flow. In the last step, the wizard asks you for the desired spray angle. Afterwards, the wizard shows you what the nozzle would be named according to our naming scheme and suggests a nozzle that meets your requirements as closely as possible.<\/p>\n

[\/vc_column_text]

<\/div>[vc_row_inner el_id=”nozzleguide_application” el_class=”nozzleguide_application”][vc_column_inner width=”1\/5″][mvc_flip_box image_id=”7449″]<\/p>\n

Application<\/h3>\n

Please select a suitable application area for you on the right.<\/p>\n

[\/mvc_flip_box][\/vc_column_inner][vc_column_inner width=”4\/5″][vc_column_text el_class=”blocksatz”]<\/p>\n

We currently differentiate our product portfolio into three main application areas: Cleaning, Distribution and Mixing. The difference lies in the distribution characteristic and the frequency range. In principle, it can be said that a cleaning nozzle has a lower frequency than a mixing nozzle. The main application areas (large symbols) are divided into even more specific areas. If you are unsure, simply select a main application area.<\/p>\n

\n<\/table>\n<\/div>\n

[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][vc_row_inner el_class=”nozzleguide_application”][vc_column_inner width=”1\/5″][\/vc_column_inner][vc_column_inner width=”4\/5″]

<\/div>
<\/div><\/div>
<\/div>[\/vc_column_inner][\/vc_row_inner][vc_row_inner el_class=”nozzleguide_pressure”][vc_column_inner width=”1\/5″][mvc_flip_box image_id=”7451″]<\/p>\n

Pressure Range<\/h3>\n

Please select a suitable print area for you on the right.<\/p>\n

[\/mvc_flip_box][\/vc_column_inner][vc_column_inner width=”4\/5″][vc_column_text el_class=”blocksatz”]<\/p>\n

Please select a print area below. We distinguish between four pressure ranges. The low pressure range up to 20 bar, the medium pressure range from 16 to 60 bar, the high pressure range from 60 to 200 bar and the maximum pressure range for pressures above 200 bar. Please note that the specification of the pressure is decisive for the mechanical resistance as well as for the jet guidance.<\/p>\n

[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][vc_row_inner el_id=”nozzleguide_pressure” el_class=”nozzleguide_pressure”][vc_column_inner width=”1\/5″][\/vc_column_inner][vc_column_inner width=”1\/5″][vc_column_text]<\/p>\n

\"LPX\"<\/p>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/5″][vc_column_text]<\/p>\n

\"LPX\"<\/p>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/5″][vc_column_text]<\/p>\n

\"LPX\"<\/p>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/5″][vc_column_text]<\/p>\n

\"LPX\"<\/p>\n

[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][vc_row_inner el_class=”nozzleguide_pressure”][vc_column_inner width=”1\/5″][\/vc_column_inner][vc_column_inner width=”4\/5″]

<\/div>
<\/div><\/div>
<\/div>[\/vc_column_inner][\/vc_row_inner][vc_row_inner el_id=”nozzleguide_capacity” el_class=”nozzleguide_capacity”][vc_column_inner width=”1\/5″][mvc_flip_box image_id=”7452″]<\/p>\n

Nozzle Capacity<\/h3>\n

Please select a nozzle capacity on the right.<\/p>\n

[\/mvc_flip_box][\/vc_column_inner][vc_column_inner width=”2\/5″][vc_column_text el_class=”blocksatz”]To select the correct nozzle, we need the nozzle capacity<\/a> (C) in the third step. You can either enter this directly on the right, or determine it using a pressure\/flow ratio at a known operating pressure. If in doubt, you can also enter a nominal value for your pump. Please keep in mind that due to pipe and friction losses the flow rate can only be reached at the pump outlet and the nozzle size should be selected slightly smaller if necessary.[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”2\/5″][vc_column_text]<\/p>\n
\n

<\/table>\n<\/div>\n

[\/vc_column_text][vc_column_text]<\/p>\n

<\/div>\n

[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/6″][\/vc_column_inner][\/vc_row_inner]<\/div><\/div>[vc_column_text]<\/p>\n

<\/table>\n

[\/vc_column_text]

<\/div>[vc_column_text]<\/p>\n
If none of theses nozzles suit your needs or you need a different material or connection just contact us.
\nWe will find a solution together.<\/strong><\/div>\n

[\/vc_column_text]

<\/div>[vc_column_text]<\/p>\n
<\/canvas><\/div>\n

[\/vc_column_text][\/vc_column][\/vc_row][vc_row to_section_layout=”full-width” txt_section_color=”light” to_para_bg=”image” to_parallax=”parallax” to_para_img=”https:\/\/www.fdx.de\/wp-content\/uploads\/2016\/04\/BG_Blue.jpg”][vc_column][vc_row_inner][vc_column_inner]

<\/div>
<\/div>[\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][vc_row][vc_column]
<\/div>

\nSimply. Plan.<\/strong>\n<\/h1>
<\/div>[vc_column_text el_class=”blocksatz”]Sometimes a picture is worth a thousand words. Therefore we offer you here the possibility to display nozzle characteristics graphically. To the right of the diagram you can add a (standard) “nozzle”, add a “custom nozzle” by using the nozzle capacity calculator, add a “pump” if you have a pump characteristic curve, combine several plotted “nozzles” to represent a combined system and remove the plotted “elements”. If you load a pump characteristic curve via CSV file, the operating point, i.e. the intersection of the nozzle characteristic curve and the pump characteristic curve, is automatically calculated. Please note that we are currently not able to take pipe losses into account. However, you can help yourself by selecting a reduced nozzle size. Below the diagram you will find the possibility to swap the two axes, to export the shown data as a CSV file (download data), to save the diagram as an image (download diagram) or to reset the whole diagram.
\n[\/vc_column_text][\/vc_column][\/vc_row][vc_row css=”.vc_custom_1610527598022{margin-right: 50px !important;margin-left: 50px !important;}”][vc_column width=”3\/4″][vc_column_text]<\/p>\n

<\/canvas><\/p>\n

[\/vc_column_text][\/vc_column][vc_column width=”1\/4″]

Add nozzle<\/i><\/span><\/h5>
[vc_column_text el_class=”blocksatz”]<\/p>\n

Add a nozzle to the chart:<\/p>\n

[\/vc_column_text]

<\/div>[vc_column_text]<\/p>\n\n