OsciJet LPX-CS

Low Pressure Nozzle

The LPX-CS is the special nozzle for surface cleaning with lower pressures. This nozzle can be operated from 130 mbar up to 16 bars and is desigend to reach its peak-performance in this pressure range. This was accomplished by tuning the jet dynamics and frequency for exactly this pressure range, resulting in an up to 7 times more effective cleaning compared to a conventional fan nozzle. As for all OsciJet nozzles, the spray angle is almost constant for all flow rates and pressures.

  • Operational pressure up to 16 bar
  • Long life time
  • 7-times better cleaning performance than a spray nozzle
  • Constant spray angle over whole operational range
  • Saves water, energy, and time
  • Individual design on request
  • Patented technology

Flyer

Flyer

PDF

Pressure in bar
0.13 bar 16 bar

Spray angle in DEG
20° 30° 45° 60° 75° 90° 120°

Capacity in CP
10 20 30 40 50 60 80 100 125 150 200 250 300 400 500

Application
Parts cleaning Food industry CIP Rinsing Fluid
distribution
Surface
wetting
Your application?
FDX offers mature innovation with fast transition to production and prolific partnership.
(Meike Arndt, Teamleader Product Management – Mobile Watering )

The table shows the volume flow in (l/min) as a dependency of the capacity and the pressure. The capacity is a measure for the volume flow and is defined as follows:

\(\mathsf{ CP = \frac{10\cdot \dot{V}}{\sqrt{\frac{p}{20}}}, \qquad \dot{V} = \frac{CP}{10}\cdot\sqrt{\frac{p}{20}}}\)

Volume flow: \(\mathsf{\dot{V}}\) in l/min, Pressure: \(\mathsf{p}\) in bar, Capacity: \(\mathsf{CP}\).

The LPX-CS nozzle was especially designed for operational pressures up to 16 bar. The nozzles provide a pipe thread
connection by default. Further connections, operational pressures, spray angles, and capacities are possible on demand.
In addition we also offer white labeling and calibrated nozzles.

Do you have further questions?
We will be happy to assist you!